DIN 34crnimo6 karfe zagaye mashaya 1.6582 karfe bar
Siffofin
34CrNiMo6 Karfe shine muhimmin kayan aikin injiniya na ƙarfe kamar yadda ya dace da BS EN 10083-3: 2006.34CrNiMo6 karfe yana da ƙarfi mai ƙarfi, babban ƙarfi da ƙarfin ƙarfin ƙarfi.
Ana amfani da 34CrNiMo6 a masana'antu kamar su jirgin sama, mota, mota, da tsaron ƙasa.34CrNiMo6 na iya sha maganin zafi kamar daidaitawa, zafi, da kashewa.Ana amfani da shi don kera sarƙoƙi, sukurori, gears, makamai, rollers, da sauran sassa na inji daban-daban.
Ƙayyadaddun bayanai
| Girman | Zagaye | Tsawon 6-1200 mm |
| Plate/Flat/Toshe | Kauri | |
| 6mm-500mm | ||
| Nisa | ||
| 20mm-1000mm | ||
| Tsari | EAF+LF+VD+Jin Ƙirƙirar Zafi (na zaɓi) | |
| Maganin zafi | An daidaita;Annealed;An kashe ;Haushi | |
| Yanayin saman | Baƙar fata;Bawon;goge;Injin;Nika;Juya;Milled | |
| Yanayin bayarwa | Jarumi;Zafafan birgima;Zane sanyi | |
| Gwaji | Ƙarfin ƙarfi, Ƙarfin Haɓaka, elongation, yanki na raguwa, ƙimar tasiri, taurin, girman hatsi, gwajin ultrasonic, binciken Amurka, gwajin ƙwayar magnetic, da dai sauransu. | |
| Lokacin bayarwa | 30-45 kwanaki | |
| Aikace-aikace | Ana amfani da 34CrNiMo6 don kayan aiki mai nauyi, injin turbine shaft ruwa, babban nauyin watsa sassa, fasteners, crank shafts, gears, kazalika da kaya masu nauyi don ginin mota da sauransu. | |
Abubuwan sinadaran (%)
| Carbon C | 0.3 ~ 0.38 |
| Silicon Sa | 0.4 |
| Manganese Mn | 0.5 ~ 0.8 |
| Sulfur S | ≤ 0.035 |
| Phosphorus P | ≤ 0.025 |
| Chromium Cr | 1.3 ~ 1.7 |
| Nickel Ni | 1.3 ~ 1.7 |
| Molybdenum Mo | 0.15-0.3 |
Kayayyakin Injini
| Ƙarfin ƙarfi σ b (MPa) | 850-1400 |
| Ƙarfin Haɓaka σ s (MPa) | ≥ 690 ~ 1000 |
| Tsawaita δ (%) | ≥9 ~ 15% |
| Tauri | 239-259 HB |
| Daidai ma'auni daban-daban | |
| Daraja | Daidaitawa |
| 34CrNiMo6 (1.6582) | EN 10083-3 |
| 4337 | ASTM A29 |
Yanayin bayarwa
Wurin ƙirƙira mai zafi, yawanci yanayin isarwa yana da zafi ƙirƙira, annealed/QT m juya/Baƙar ƙasa.
Wurin birgima mai zafi, yawanci yanayin isarwa yana da zafi birgima, annealed/QT, Baƙar fata.
Hakuri
| Diamita (mm) | Hakuri | ||
| Karfe Round Bar | 80-600 | Baƙar fata: 0 ~ + 5 | M Machined ko Juya: 0 ~ + 3 |
| 650-1200 | Baƙar fata: 0 ~ + 15 | M Machined ko Juya: 0 ~ + 3 | |
| Hot Rolled Karfe Round Bar | 16-310 | Baƙar fata: 0 ~ + 1 | Saukewa: H11 |
| Sanyi Zane Karfe Zagaye Bar | 6-100 | Baƙar fata:H11 | Saukewa: H11 |
Kunshin
1.By bundles, kowane dam nauyi a karkashin 3 ton, ga kananan m
sanduna zagaye diamita, kowane dam tare da 4 - 8 karfe tube.
Ganga mai ƙafa 2.20 ya ƙunshi girma, tsawon ƙasa da 6000mm
Gangar ƙafar ƙafa 3.40 ta ƙunshi girma, tsayin da ke ƙarƙashin 12000mm
4.By jirgin ruwa mai girma, cajin kaya yana da ƙasa da kaya mai yawa, kuma babba
Ba za a iya loda masu girma dabam a cikin kwantena ba za a iya jigilar kaya ta babban kaya
Certificate of Quality: Bayar a cikin Turanci, ban da al'ada sharuddan, samar tsari, da inji dukiya (ƙarfin samar da ƙarfi, tensile ƙarfi, elongation da taurin), ƙirƙira rabo, UT gwajin sakamakon, hatsi size, zafi magani hanyoyin da samfurin ne wanda aka nuna akan Takaddun Takaddun Shaida.
Alamar alama: Heat No. za a yi sanyi hatimi da Karfe sa, diamita (mm), tsawon (mm), da manufacturer LOGO da nauyi (kg) fentin.
Tabbatar da inganci
1. Tsanani bisa ga buƙatun
2. Samfura: Samfura yana samuwa.
3. Gwaje-gwaje: Gwajin gwajin gishiri / Gwajin Tensile / Eddy halin yanzu / Gwajin abun da ke ciki bisa ga buƙatar abokan ciniki
4. Certificate: IATF16949, ISO9001, SGS da dai sauransu.
5. EN 10204 3.1 Takaddun shaida
